Sustainability and Waste Management

Sustainability and Waste Management Introduction The rapid economic development of Australia has underlined the necessity to minimize the impact of human activities on the environment. Scientists and public administrators pay close attention to waste management. One can say that the increasing dependence on landfills is one of the problems that should be addressed by policy-makers.Advertising We will write a custom essay sample on Sustainability and Waste Management specifically for you for only $16.05 $11/page Learn More This paper is aimed at showing that people recover energy from waste, rather than deposit it in landfills. This is the main thesis that should be elaborated. Overall, this strategy has several important advantages that can be of great value to Australian community. In particular, it can reduce water, air and soil pollution caused by disposing of refuse in landfills. Secondly, this approach can decrease the cost of energy, and this opportunity is important for the economic sus tainability of the country. Finally, in the future, this approach can improve the use of land in various urban areas. These are the main aspects that can be singled out. The challenges associated with landfills In order to examine this topic, one should first illustrate the problems that are associated with landfills in Australia. It should be mentioned that during the period between 2001 and 2007, the amount of waste, which was deposited in landfills, grew by approximately 12 percent (Australian Bureau of Statistics 2013). In 2001, there were 19 million tons, while in 2007 there were 21.3 million tons (Australian Bureau of Statistics 2013). Overall, one can speak about commercial, industrial, and municipal waste that is not recycled in any away (Australian Bureau of Statistics 2013). This trend is likely to continue in the future. It should be noted that the dependence on landfills can increase in the future due to the rapid demographic growth of the Australian society. This argume nt is particularly relevant, if one speaks about large urban areas such as Sydney or Melbourne that attract people from different parts of the world. There are several challenges that are associated with the growth of landfills, for example, leachates or emissions to water, visual disamenities, or the release of greenhouse gases (BDA Group 2009, p. 4). Moreover, one should bear in mind that approximately 30 percent of Australian landfills do not have the technologies that can enable them to capture methane and other chemicals that can produce an adverse on the environment (Lancaster 2012, p. 133). Thus, the increasing reliance on landfills can contribute to greenhouse effect (BDA Group 2009).Advertising Looking for essay on environmental studies? Let's see if we can help you! Get your first paper with 15% OFF Learn More Furthermore, one should not forget that the decomposition of waste is a very time-consuming process (Lancaster 2012, p. 133). In some cases, the decomposition can take from 50 to 450 years (Lancaster 2012, p. 133). This is why this trend should not be overlooked by policy-makers who must ensure the environmental sustainability of the country. In particular, they need to find some viable alternatives to landfills that cannot remain the only approach to waste management. The benefits of waste-to-energy technologies There are several solutions to this problem, and one of them is the recovery of energy from waste. The most widespread method of achieving this goal is the incineration of refuse. In the past, policy-makers did not favor this approach because the incineration of waste could result in the emissions of various toxic materials such as dioxins and fly ash that can pose a threat to the health of a person (Afgan Carvalho 2002). However, in the course of the last two decades, waste-to-energy (WtE) technologies have considerably evolved and their negative impacts have been minimized (Worrell Vesilind 2011). For exampl e, modern incineration facilities emit a smaller amount of CO2 in comparison with landfills (Letcher 2008, p. 151). This is one of issues that should be considered by public administrators. Additionally, there are other methods of deriving energy from waste. For example, one can mention pyrolysis, thermal depolymerization, or plasma arc classification (Letcher 2008, p. 151). These processes can produce fuel-cell hydrogen, biodiesel, bioethanal, or crude oil that are necessary for the generation of energy (Letcher 2008, p. 151). These techniques can be useful for processing different types of waste. Furthermore, such processes can minimize the emission of toxic substances into air. Thus, one should not suppose that incineration is the only technique that can be used. To a great extent, these examples suggest that technological developments can help people generate from waste. This is one of the points that can be made.Advertising We will write a custom essay sample on Sustain ability and Waste Management specifically for you for only $16.05 $11/page Learn More There are several examples that can illustrate the usefulness of WtE technologies. For instance, this approach minimizes the release of various greenhouse gases as carbon dioxide, methane, or nitrogen oxides (Afgan Carvalho 2002, p. 445). These substances can be used for the generation of energy. More importantly, this approach can be a valuable tool for decreasing the greenhouse effect which is caused by methane or carbon dioxide (Worrell Vesilind 2011). This is the main environmental benefits of transforming refuse into a source of energy. Furthermore, these technologies can decrease the overall quantity of waste by more than 80 percent (Worrell Vesilind 2011). This benefit should not be overlooked by public administrators because in the future, the increasing amount of refuse can prevent the community from making an effective use of land in various urban areas of Australia w hich become much more populated (Australian Bureau of Statistics 2013). Furthermore, the growth of landfills can be attributed to intensifying economic activities. Thus, one should find ways of addressing this problem in the following years. To a great extent, the adoption of WtE technologies can be important for improving the environmental sustainability of the country and overall quality of life. These are some of the main examples that can be distinguished. Additionally, this strategy can help the national economy overcome its dependence on natural resources such as oil, natural gas, or coal that may eventually become depleted (Afgan Carvalho 2002, p. 445). It should be kept in mind, waste can be used to generate approximately 20 percent of electric power that urban areas need (Worrell Vesilind 2011, p. 23). Overall, the investment in these technologies can enable the country to save the cost of generating energy and use it for other purposes such as healthcare or education. Ye t, this opportunity is often lost nowadays. For example, a signification fraction of municipal waste combustible; furthermore, it can be used for the generation of energy (Worrell Vesilind 2011, p. 23). However, in many cases, it is not processed at all because there are not many facilities that can recover energy from this type of waste. The need to find alternative sources of energy can become even more urgent at the time when the price of fossil fuels increases.Advertising Looking for essay on environmental studies? Let's see if we can help you! Get your first paper with 15% OFF Learn More This is why the community should consider the benefits of WtE technologies because they can make Australia more self-sufficient. This is one of the issues that should be singled out because it is important for understanding the economic aspects of waste management. Admittedly, the recovery of energy from waste is not the only approach that policy-makers can consider. In particular, one should not forget about such a strategy as recycling which can also be viewed as a good alternative to landfills. In many cases, it can be a valid solution to environmental and economic problems. Nevertheless, this method is not always sufficient for reducing the volume of refuse. The problem is that some materials such as polymers cannot be effectively recycled. However, they can be used for the generation of energy. Therefore, one should not disregard the use of WtE technologies since these tools can decrease the amount of waste produced by various human activities. Conclusion Overall, this discussi on shows that by recovering energy from waste, one can derive considerable environmental and economic benefits. At present, the Australian community should find some alternative to landfills because the volume of refuse increases significantly due to demographic growth and intensifying economic activities. The use of various WtE technologies is helpful for reducing the volume of waste that can originate from households or commercial enterprises. Secondly, this type of processing minimizes the emissions of substances that contribute to greenhouse effects. Apart from that, this approach is critical for reducing the dependence on fossil fuels that can eventually become depleted. These are the main issues that can be identified. References Afgan, N Carvalho, M 2002, New and Renewable Technologies for Sustainable Development, Springer, New York. Australian Bureau of Statistics 2013, Waste Disposed to Landfills. Web. BDA Group 2009, The full cost of landfill disposal in Australia. Web. L ancaster, S 2012, Green Australia, Wakefield Press, Melbourne. Letcher, T 2008, Future Energy: Improved, Sustainable and Clean Options for our Planet, Elsevier, Boston. Worrell, W, Vesilind, P 2011, Solid Waste Engineering, SI Edition, Cengage Learning, New York. Sustainability and Waste Management Executive Summary The waste assessment was conducted to identify the waste generating processes and how to minimize waste at Nowra Chemical Manufacturers. The assessment indicates that wastes are mainly generated during the production of various chemicals. Specifically, wastewater is produced in the process of cleaning the manufacturing facilities. The wastewater is collected in a single waste tank where the chemicals in it mix to form solid waste (sludge).Advertising We will write a custom case study sample on Sustainability and Waste Management specifically for you for only $16.05 $11/page Learn More Thus, the main waste minimization opportunity is to eliminate the formation of sludge. This can be achieved by installing at least three different waste tanks to collect wastewater. Wastewater that contains a specific chemical will be collected in a particular tank to prevent sludge formation. This strategy will enable the company to reduce the cost of waste m anagement significantly. Description of the Facility Nowra Chemical Manufacturers (NCM) is a medium sized producer of various chemical products in Australia. The company has employed 45 people who are specialized in various disciplines such as chemical engineering. The company produces â€Å"over 200 specialty chemicals, which include various detergents, cleaning products, and disinfectants† (NCM 2014). These products are manufactured in the company’s production facility that covers 5 acres of land. The company’s production site is located in Nowra, New South Wales. The site has three sections, which include the administration block, the storage area, and the factory. The factory area has 24 reactor tanks that are used for various chemical processes (NCM 2014). It also has 38 mixing vessels that are used to blend various chemicals and raw materials. The capacities of the vessels vary from 200 to 20,000 liters. The factory has 20 tanks that are used for bulk stor age of raw materials and finished products that are in liquid form. Currently, the company’s waste management practices focus on reducing discharge of effluent into the ambient environment. In this regard, the company has built bund walls to prevent spillage of wastewater and chemicals. The company also recycles wastes and steam to reduce pollution. Moreover, it strives to reduce the wash down water that it uses to dispose wastes from 50KL to 30 KL per week. These practices cost the company $60,000 annually (NCM 2014). Rationale for Waste Assessment The reasons for conducting the waste assessment include the following. First, it will help the company to comply with the regulations in its industry. The government of Australia requires all manufacturers to submit annual reports on the amount of wastes that they discharge into the environment (Chauhan 2008, p. 57). Manufacturers are also required to report on the actions that they have taken to reduce pollution. Second, the asse ssment will enable the company to achieve its desire to reduce wastes. The assessment has identified the areas that require improvement in terms of reduction in waste production. It has also recommended strategies for reducing the wastes. Third, implementation of the recommended waste reduction measures will enable the company to reduce its operating costs.Advertising Looking for case study on environmental studies? Let's see if we can help you! Get your first paper with 15% OFF Learn More Methodology Waste Assessment and Data Collection Site visits were conducted in order to collect the data that was required for the assessment. The first visit focused on collection of firsthand information concerning the operations at the manufacturing site. Specifically, the aim of the visit was to identify the sources of the wastes, the disposal routes, waste generation rates, and the composition of the wastes. Subsequent visits were conducted in order to review the compa ny’s waste management system. The main objective of the subsequent visits was to identify opportunities for waste minimization and safe disposal of wastes. The data used for the assessment was collected through the following strategies. First, interviews were conducted during the site visits to collect information concerning the waste generation processes. The interviewees included the company’s technical manager, production engineer, and the general manager. Second, observations were made during the site visits to identify the waste disposal routes and the composition of the wastes generated by the company. Finally, data was collected by reviewing relevant documents such as the company’s environmental sustainability reports, financial statements, and strategic plans for waste management. These documents provided important information such as the amount of waste generated per year, the cost of disposing the wastes, and the strategies being used by the company to minimize waste. Waste Generating Processes The company’s wastes mainly consist of solid and liquid materials. Sludge is the main solid waste produced by the company. The liquid waste mainly consists of used water and toxic liquid chemicals. The liquid waste is often treated before being discharged into the ambient environment. This helps in reducing the environmental effects of various toxicants in the liquid wastes (Kumar 2007, p. 78). NCM produces a large number of chemicals on a regular basis to meet the needs of its customers. As a result, it uses a wash down approach to clean vital facilities such as reactors and mixing vessels after every operation. This process generates large volumes of wastewater that is contaminated with various chemicals (NCM 2014). The wastewater and toxic liquid chemicals are collected in a waste tank where they are treated before being discharged into the environment. However, mixing the liquid wastes in the tank leads to formation of large qua ntities of solid wastes in the form of sludge. Overall, the company produces 25 tons of solid waste (sludge) and 2,400 KL of wastewater annually (NCM 2014).Advertising We will write a custom case study sample on Sustainability and Waste Management specifically for you for only $16.05 $11/page Learn More The disposal route begins at the waste tank where the liquid wastes are collected. The sludge produced in this tank is transferred to another tank where it is diluted and discharged into the company’s sewer. The sludge that remains in the tank is shoveled into filter bags to separate water from any solid wastes (NCM 2014). The sludge is then disposed in landfills that have been hired by the company. The cost of disposing the wastes is very high due to the inefficiencies in the company’s waste management system (Australian Government 2008). In particular, the waste management system is labor intensive since most of the processes such as shovelin g sludge is done manual. Additionally, the solid wastes have to be transported by trucks to landfills where they are disposed. Overall, the company spends approximately $60,000 annually to dispose its wastes. Results from the Waste Assessment Solid Wastes Analysis Sludge formation in the company’s waste stream is mainly caused by 41 chemical products that are regularly produced (NCM 2014). The 41 chemicals are categorized into three groups namely, anions, nonions, and others (disinfectants, emulsions, and oils). These chemicals react differently when mixed in wastewater as shown in table 1. Table 1 Chemicals in wastewater Results Anions mixed with anions No sludge is produced Nonions mixed with nonions No sludge is produced Disinfectants, emulsions, and oils mixed together Sludge is produced Nonions mixed with anions Sludge is produced Anions mixed with disinfectants, emulsions, and oils Sludge is produced Nonions mixed with disinfectants, emulsions, and oils S ludge is produced The production rate of each of the three categories of chemicals that produce sludge is summarized in table 2. Table 2 Chemical category Tons per year Anions 696 Nonions 571 Disinfectants, emulsions, and oils 433 Total 1,700 Waste Management Costs Table 3 presents a detailed analysis of the cost of managing the company’s solid and liquid wastes.Advertising Looking for case study on environmental studies? Let's see if we can help you! Get your first paper with 15% OFF Learn More Item Cost per unit in $ Cost per year in $ Water intake 0.30 per KL 3,487 Effluent Regular wastewater 0.04 per KL 461 BOD wastewater 0.70 per KL 2,822 Suspended solids 0.55 per KL 2,028 Labor 40 per hour 31,200 Equipment operation 876 Warehousing/ storage 8,250 Transportation (sludge) 75.30 per ton 1,920 Neutralizers 8,400 Figure 1: comparison of waste management cost items Figure 2: Six-year waste management costs Analyses of Results Waste Generation Table 1 indicates that solid waste (sludge) is generated when wastewater that contains different categories of chemicals mix. In addition, sludge is produced when wastewater that contains disinfectants, emulsions, and oils mix. Table 2 shows that anions form the largest share (40.94%) of the chemicals that cause sludge formation. Thus, much of the sludge formation can be attributed to wastewater that contains anions. The data presented in table 1 and 2 means that generation of solid waste can be reduced if the company avoids mixing wastewater that contains different chemicals. Table 3 and figure 1 indicate that labor is the major cost item in the company’s waste management budget. This is attributed to the fact that the waste management system is labor intensive. Figure 2, shows that the waste management costs have been increasing in the last six years. Thus, the company has to minimize its wastes in order to reduce its operating costs. Waste Minimization Opportunities The alternatives that the company can adopt to minimize waste include reduction of wastewater and solid wastes. Reduction of wastewater is likely to reduce the costs associated with treating wastes and discharging them into the ambient environment (Anand 2010, p. 89). However, achieving significant wastewater reduction will be difficult since future increase in production will lead to increased water intake. However, the company can achieve significant reduction in solid waste generation if it integrates clean pr oduction principles in its operations (Berkel 2000). In particular, the formation of sludge can be eliminated if the wastewater is discharged according to the chemicals that it contains. This means that the wastewater that contains each chemical will be discharged in a separate tank, thereby eliminating the formation of sludge (solid waste). Cost Benefit Analysis The costs associated with implementing clean production principles in order to reduce solid wastes include the following. First, the company will incur the costs associated with modifying its waste disposal system in order to prevent wastewater with different chemicals from mixing. Second, the company will incur the costs associated with conducting chemical mixing trails in order to identify more chemicals that are likely to form sludge when mixed. Finally, the company will have to train its employees on how to implement the new waste disposal system. In this case, the company will have to pay for the training if it is outs ourced. The benefits of implementing the new waste disposal system include the following. First, the volume of solid waste (sludge) will reduce considerably. As a result, the cost of disposing wastes will reduce significantly. Second, the company will not be required to change its production system by eliminating some products or using alternative raw materials (Australian Government 2008). Thus, the company will improve its competitiveness by reducing its waste management costs without changing its product range. Third, reducing sludge formation will reduce labor costs significantly. Labor costs will reduce because disposal of sludge is labor intensive. Finally, the storage space that is currently being used to store large filter bags that are used in the solid waste disposal system will be available for storing other items. Savings Analysis The new waste management system will enable the company to realize cost reductions as shown in table 4. Cost reduction will be achieved in wat er intake, labor, warehousing, and transportation. Table 4 Item Current cost per year in $ Expected cost per year in $ Savings per year in $ Water intake 3,487 3,200 287 Effluent Regular wastewater 461 461 0 BOD wastewater 2,822 2,822 0 Suspended solids 2,028 2,028 0 Labor 31,200 10,400 20,800 Equipment operation 876 1,000 -124 Warehousing/ storage 8,250 2,750 5,500 Transportation (sludge) 1,920 640 1,280 Neutralizers 8,400 8,500 -100 Total 59,444 31,801 27,643 Recommendations for Waste Minimization Objectives The aims of future waste minimization include the following. The first objective is to reduce the volume of solid waste (sludge) by 60% in the next two years. The second objective is to reduce the volume of wastewater from 2,400KL to 1,200 KL (50%) in the next two years. The final objective is to train all the five employees who are working in the technical department on the new waste management system. The waste minimization strategy is to prevent sl udge formation at the disposal point. In this regard, the waste disposal system will be modified by installing different waste tanks to collect wastewater that contains each of the major chemicals that produce sludge. The reduction in sludge formation will lead to reduction of wastewater since little water will be required to dilute solid wastes at the treatment plant (Berkel 2000). Implementing the Recommendations The first stage should focus on conducting chemical mixing trials to identify all the chemicals that are likely to form sludge when mixed. This will enable the company to determine the number of waste tanks that it should install to dispose wastewater that contains various types of chemicals. The second stage should focus on training the employees on the new waste management system. The training should focus on improving environmental conservation awareness among the employees, cleaning procedures, installing waste disposal facilities, and effluent management. In the last stage, the company should modify the effluent stream by installing at least three waste tanks to collect wastewater that contains each of the three types of chemicals that have already been identified as major causes of sludge formation. Each tank should have a unique color to prevent confusion during disposal of wastewater. Timeframe for the Implementation Activity to be implemented Time Chemical mixing trials 3 months Training employees 8 months Modifying the effluent stream 12 months References Anand, S 2010, Solid Waste Management, McGraw-Hill, New York. Australian Government 2008, Cleaner Production Demonstration Project at Nowra Chemical Manufacturers,. Web. Berkel, R 2000, Cleaner Production for Process Industries. Web. Chauhan, B 2008, Environmental Studies, McGraw-Hill, New York. Kumar, A 2007, Environmental Studies, John Wiley and Sons, New Delhi. NCM 2014, About Us: Sustainability. Web.

How to Revise Your Paper for Clarity

How to Revise Your Paper for Clarity Writing and revising a paper is a time-consuming and messy process, and this is exactly why some people experience anxiety about writing long papers. It’s not a task that you can finish in a single sitting- that is, you can’t if you want to do a good job. Writing is a process that you do a little bit at a time. Once you come up with a good draft, it’s time to revise. Ask yourself the following questions as you go through the revision process. Does the Paper Fit the Assignment? Sometimes we can get so excited about something we find in our research that it sets us off in a new and different direction. It’s perfectly fine to veer off in a new direction, as long as the new course doesn’t lead us outside the bounds of the assignment. As you read over a draft of your paper, take a look at the directional words used in the original assignment. There is a difference between analyze, examine, and demonstrate, for example. Did you follow the directions? Does the Thesis Statement Still Fit the Paper? A good thesis statement is a vow to your readers. In one single sentence, you stake a claim and promise to prove your point with evidence. Very often, the evidence we gather doesn’t â€Å"prove† our original hypothesis, but it does lead to new discovery. Most writers have to re-work the original thesis statement so it accurately reflects the findings of our research. Is My Thesis Statement Specific and Focused Enough? â€Å"Narrow your focus!† You’re very likely to hear that many times as you progress through the gradesbut you shouldn’t get frustrated by hearing it time and again. All researchers have to work hard at zooming in on a narrow and specific thesis. It’s just part of the process. Most researchers revisit the thesis statement several times before they (and their readers) are satisfied. Are My Paragraphs Well-organized? You can think of your paragraphs as little mini-essays. Each one should tell its own little story, with a beginning (topic sentence), a middle (evidence), and an end (concluding statement and/or transition). Is My Paper Organized? While your individual paragraphs may be well-organized, they may not be well-positioned. Check to make sure that your paper flows from one logical point to another. Sometimes good revision starts with good old cut and paste. Does My Paper Flow? Once you make certain that your paragraphs are placed in a logical order, you will need to revisit your transition statements. Does one paragraph flow right into another? If you run into trouble with, you might want to review some transition words for inspiration. Did you Proofread for Confusing Words? There are several pairs of words that continue to vex the most accomplished writers. Examples of confusing words are except/accept, whose/who’s, and effect/affect. It’s easy and quick to proofread for confusing word errors, so don’t omit this step from your writing process. You can’t afford to lose points for something so avoidable!